Products
© 2021 Dutch-
Head Office:
Navana DH Tower (10th Floor), Suite No. 1001
6 Panthapath, Dhaka-
T +880-
F +880-
M mail@dbpackltd.com
Factory:
Baluakandi, Gazaria, Munshiganj, Bangladesh.
Contact
Dutch-
FIBC Options
Big bags are very a versatile packaging and are often made-
Our top spout gives your operators full control of the product during the filling process and a secure leak proof closure
A top skirt for easy filling
A conical shape to allow better filling of non-
A spout & Capuchon (petal star) to prevent bulging and to minimize the risk of contamination
Filling and discharging
Every type of FIBC we make is made to fit your manufacturing processes. Because every customer has different requirements and uses different filling or discharging systems, we supply various kinds of filling and discharging mechanisms for your big bags. We have listed some of our most commonly used systems.
Filling systems
Are you considering filling FIBCs with a special filling machine? Our specialists can introduce you to one of our filling system partners and advise you on the most suitable FIBC for that system. By addressing this issue at an early stage, you can prevent serious disruption to your production process and therefore save a lot of money on future expenses. We have several accessories available, designed to fit your existing filling system:
Key industries
Discharging system options
Depending on your requirements or those of your client, we supply a number of extra options in addition to the standard discharging systems. These may involve opening the big bag remotely, an additional reinforcement in the bottom to prevent bulging or an additional hygiene flap to prevent contamination. There are several discharging systems available:
E-
B-
Bonbon closure for two-
Bottom cross for additional support to the discharge spout
Petal star closure to prevent bulging and to minimize the risk of contamination
Hygiene flap to ensure the discharge spout stays clean
Loops
In most cases, four loop FIBCs are custom-
Standard loops
Standard loops, also known as corner loops, are the type of loops most used on big bags. Lift loop is sewn into the seam of each corner of the bag and is a very cost-
Cross corner loops
Much like standard loops, cross corner loops are sewn into the corners of the bag, but instead of the loops being sewn into the inside seam of the bag, they are sewn into eight points in opposite corners of the bag. The loops are designed to ensure that forklift operators can grab and lift the bags easily, reducing your bag handling time.
Tunnel loops
Tunnel loops are two continuous tunnels along the side of the FIBC. They have been designed to be handled by one forklift operator and therefore save additional labor. Using some of our FIBC options, the forklift truck driver can lift up the FIBC and place it into the filling or discharging system without having to get out of the truck. In addition, this could also reduce the number of pallets you normally would use.
Dust proof seams
Dust proof seams can be used to prevent leaks or seepage. During the manufacturing process, the needle of the sewing machine makes tiny holes in the fabric. These could cause a seepage if the FIBC was filled with fine grain powders such as cocoa, milk powders, starch, lead powders, iron powders or resins. A dust proof seam is a downy cord that is attached to the seams and prevents spillage.
Single-
Double-
Triple (both sides + sandwiched in between)
Triple with felt
Options: